|
Post by kmc77xracing on Feb 17, 2013 17:26:02 GMT -5
i bought a car and it has afcos looking to put bilstines on how do i go about making the switch?
|
|
|
Post by slinger7 on Feb 18, 2013 7:19:21 GMT -5
Depends on the year of the car. If the frame is 2011 or newer just bolt them on if it's older you will need the mounts that SE made for them.
|
|
|
Post by kmc77xracing on Feb 18, 2013 10:57:30 GMT -5
its an 03
|
|
|
Post by slinger7 on Feb 19, 2013 9:13:06 GMT -5
SE has brackets that you bolt on to give the extra length for the bilstiens I had them on front and rear but you only need them for the bilstiens.There are left and rights.I would explain how they go on but it's to hard easier to show.
|
|
|
Post by kmc77xracing on Feb 19, 2013 9:38:38 GMT -5
Ok thanks I have the brackets on the front but I wasn't sure what to do on the rear. What do I need to put springs on the shocks?
|
|
|
Post by slinger7 on Feb 19, 2013 13:35:51 GMT -5
SE sells spring kits.
|
|
|
Post by slinger7 on Feb 19, 2013 13:38:10 GMT -5
Putting the brackets on the reae can be kinda tricky getting them on right.
|
|
|
Post by kmc77xracing on Feb 19, 2013 17:35:07 GMT -5
ok thank you for you help
|
|
|
Post by rthocker on Mar 1, 2013 18:09:01 GMT -5
For mounting the Bilstiens to the rear we welded a lug nut approx 1 1/4" below the bolt hole and use a fine thread bolt to hold shock to lug nut.
|
|
|
Post by rthocker on Mar 1, 2013 18:09:34 GMT -5
For mounting the Bilstiens to the rear we welded a lug nut approx 1 1/4" below the bolt hole and use a fine thread bolt to hold shock to lug nut.
|
|