|
Post by seshleman on Sept 27, 2011 14:46:33 GMT -5
Need a quick fix and have heard that you can mount bilsteins on the rear with the mounts used to put bilsteins in the the front. Anybody out there try that. If you have, could you please explain to me how to do it. Don't have access to a welder this week so I need another option. Either respond here or email at slesh_5@comcast.net
Esh
|
|
|
Post by rocketj25 on Sept 28, 2011 6:41:53 GMT -5
I have seen them bolted to the existing shock mount, just facing down. I hope this helps, Rick
|
|
|
Post by seshleman on Sept 28, 2011 8:15:30 GMT -5
You mean mount the shock upside down?? And thx for the help.
|
|
|
Post by slinger7 on Sept 28, 2011 9:18:25 GMT -5
No, If you take the front mount and turn it upside down it will bolt on to the old mount the bottom of the shock will be slightly towards the back.You will also have to check the clearance of the tire to the bottom bolt you may have to slide the LR hub out a little bit the RR should be OK.Just make sure you have a left and right mount.Where do you race at if I'm there maybe I can help you out.
|
|
|
Post by seshleman on Sept 28, 2011 12:38:11 GMT -5
Thx...I have 2 mounts because I had them mounted up front but want the bilsteins on the rear. Trying to get ready to race at Linda's Friday night. #25
Thx again, Esh
|
|
|
Post by slinger7 on Sept 28, 2011 17:57:46 GMT -5
Talk with Paul he had showed me how to put them on our car last year.
|
|